Go Back

POINTING MASTIC (29 OZ)

W.R. Meadows Of Canada

Vendor Part # 5130129

Pointing Mastic is a pre-mixed, cold-applied, polymeric single component sealing compound. It was specifically designed to seal all exterior, vertical and horizontal terminations of MEL-ROL , MEL-DEK, AIR-SHIELD and PMPC from W. R. MEADOWS. It is also used for adhesive bonding of PROTECTION COURSE and MEL-DRAIN.


Additional Information

USES
POINTING MASTIC is designed to meet a variety of building/construction product applications. These uses include sealing terminations for vertical or horizontal vaporproofing or waterproofing membranes, deck waterproofing systems, air barriers and flashing membranes.  

It can be used on all patches and overlaps in detail areas. It offers excellent cohesive and adhesive qualities when applied to structural concrete, masonry and/or wood. Once applied, it provides excellent adhesive and bonding strengths. It cures to form a tough, flexible membrane.
 

It is used for adhesive bonding of protection course boards and rolled matrix draining systems. POINTING MASTIC is also applied between membrane and clamping rings at all terminations, drains and protrusions. In addition, POINTING MASTIC is ideal for sealing joints and concrete curbs and gutters. POINTING MASTIC can be applied to seal top edge horizontal terminations as well as the inside and outside corners of overlapping detail strips.

FEATURES and BENEFITS

COVERAGE
Approx. 200 lineal ft. (61m) per gallon (3.79 L), when used as directed

FOR INDUSTRIAL USE ONLY

APPLICATION
Surface Preparation…All surfaces to receive an application of POINTING MASTIC should be dry, frost-free, clean and free of all contaminants.

Application Method…For easy application, store at temperatures of 60°F (16°C) or higher before using. Material will be stiffer and more difficult to work with at cooler temperatures. POINTING MASTIC can be easily applied with a caulking gun or trowel. Apply only in areas that will not be covered with a waterproofing membrane. Apply and spread the material to a thickness of approximately 1/8" (3.18mm) in a strip 1 to 3 inches (25.4 to 76.2mm) wide.

A bead of POINTING MASTIC is applied to the top edge horizontal termination of the vaporproofing or waterproofing membranes on vertical walls.

The corner and footing on inside corners are finished with POINTING MASTIC in the center of the detail strip where the vertical wall and footing meet. The outside corner is finished with POINTING MASTIC in the lower center point where vertical wall and footing meet. POINTING MASTIC should also be applied at the laps around corners, extending 12 inches (30.48 cm) in each direction from the corner.

A bead of POINTING MASTIC should also be applied between membrane and clamping rings and at all terminations, drains and protrusions.

Clean up…Tools can be cleaned with mineral spirits at the end of each workday. Follow manufacturer's precautions when using a solvent as a cleaner.

PRECAUTIONS
POINTING MASTIC VAPOR IS FLAMMABLE. Read and follow application information and health and safety information on product label.