Northland Construction Supplies

Features and Benefits

• Increases bond strength
• Improves flexural strength
• Improves workability by eliminating premature evaporation of mix water; ensures better curing and a stronger, more durable repair
• Use as an admixture for horizontal, vertical exterior and interior concrete repairs and concrete toppings. When mixed with cementitious materials, Planicrete UA is suitable for properly prepared pre-cast, cast-in-place, post-tensioned and pre-stressed concrete repair

Industry Standards and Approvals
LEED Points Contribution                                              LEED Points
MR Credit 5, Regional Materials*................................ Up to 2 points
IEQ Credit 4.2, Low-Emitting
Materials – Paints & Coatings.................................................1 point

* Using this product may help contribute to LEED certification of projects in the categories shown above. Points are awarded based on contributions of all project materials.

Where to Use

• Use in mortar mixes for interior or exterior applications.
• Use to enhance applications of Concrete Renew™ and Concrete Renew Fine.
• Use to create decorative surface finishes in a variety of colors when combined with Keracolor™ U or Ultracolor ® Plus in a micro-topping application.
• Use to enhance the performance of mortars in thin finishing applications, such as micro-toppings, refinishing walkways, patios and parking decks. Applications should subsequently be sealed to provide additional durability and maintain cleanliness.
• Use to enhance patch performance, bond and flexural properties of Mapecem® Quickpatch.
• Use with products to enhance cosmetic repairs on ramps, beams and columns.

Limitations

• Concrete substrate and ambient temperatures must be between 45°F and 95°F (7°C and 35°C) before application.
• When adding Planicrete UA to Concrete Renew, Concrete Renew Fine, Mapecem Quickpatch, MAPEI’s 4 to 1™ mortar mix, and alternate mortar mixes, follow product instructions as indicated in the products’ Technical Data Sheets (TDSs).
• When adding to Keracolor U or Ultracolor Plus, follow the product instructions below. Do not use with Keracolor S.
• Use only with the specified MAPEI products and mortar mixes.
  Do not apply over any substrates containing asbestos.

See Technical Information for More Details.

Sizes Available:

• 4L (SKU# 04, 7-15, 04-7017)
• 18.9L (SKU# 04-7013)