Features and Benefits
Mix LeveLayer I with water, pour or pump it onto the floor and it will level itself (no troweling) to a smooth hard surface. LeveLayer I can be applied in thickness ranging from feather edge up to 4" (10.2 cm). It develops a superior bond to the substrate and will accept foot traffic normally within four hours. LeveLayer I is not a gypsum based product.
- Walk on in 2-4 hours
- Install floor covering in as little as 14 hours
- Install up to 5” thick
- Compressive strength exceeds 5400 psi
- Can be featheredged
- No troweling required
- 50 lb. bag covers approximately 50-55 sq. ft. @ 1/8” thick
- LeveLayer can be used to level or create a smooth surface on interior floors. It can be used on new construction projects to correct rough, unfinished, or uneven floors. On restoration projects, use LeveLayer to produce a smooth, even finish over the existing substrate.
See Technical Information for More Details
Dayton LeveLayer is Available in