Northland Construction Supplies

A plastic anchor for attaching insulation to concrete and masonry. Sold by the piece.

Features and Benefits

• Fastenable thickness up to 200 mm
• Specially structured head helps to ensure bonding of plaster applied directly over the anchor
• Embedment depth down to 30 mm
• Simple setting by hammering
• No metal reduces the potential condensation behind finish coat of EIFS

Specifications

• Material composition:Polypropylene, non UV resistant
• In-Place Temperature Range: -40 degrees Celsius to 80 degrees Celsius (-40F to 176F)
• Temperature when Setting: 0 degrees Celsius to 40 degrees Celisis (32F to 104F)
• Package quantity:250
• Insulating material thickness: 80 - 100 mm (3-1/8" to 4")
• Anchor length:130 mm (5")
• Bit Diameter: 5/16"
• Minimum Embedment Depth: 29 mm (1-1/8")

Installation Instructions

1. Drill a 5/16" diamter hole through insulation into base material.
2. Hammer anchor into place until washer is flush with insulation.
3. Anchor is set. For outdoor application, anchor head must be covered by finish.