5" Protech Bit
5" (127 mm) Porcelain Diamond Bit (ECB127)
Applications
- Porcelain Tile
- Ceramic Tile
- Glass Plate
- Hard PVC Plate
- Thin Marble Tile
Machines
- Handheld drill (800-2500 RPM)
- Drill Press
- Wireless drills not recommended.
Condition
- WET ONLY
How To Use Protech Porcelain Diamond Bit
- Put tile/plate on solid non-slip base such as wood or concrete plate. Drop water on area where hole is to be made.
- Start drilling hole at 75degree-85degree angle to bite into tile to a depth of 1-2 mm (1/16")
- Hold drill at a 90 degree angle and swing 5degrees-10degrees to finish drilling. Use very little pressure. Do not push straight down. Make sure water is sufficient to wet bit.
- Clean out debris after drilling.
Additional Info
- SKU# 06-3056
